Pen type tester/ Conductivity DIST 1 TDS tester HANNA

Pen type tester/ Conductivity DIST 1 TDS tester HANNA
Brand: Hanna Productts
Product Code: HI98301
Availability: In Stock
Price: Rs. 3,411
This product has a maximum quantity of 20
DiST®1 TDS Tester
with 1 mg/L resolution and 0.5 TDS Factor
  • Graphite electrodes
  • ATC
  • Simple one point calibration
  • Easy to use
  • Economical


DiST’s are rugged and reliable pocket-sized testers that offer quick and accurate readings of conductivity or TDS.

The DiST® family of testers is widely used for monitoring EC/TDS in drinking water, water conditioning, reverse osmosis, cooling towers, wastewater, laboratories, agriculture, aquaculture and aquariums, hydroponics and the printing industry.

This tester features an amperometric graphite electrode that provides better repeatability in measurements since they do not oxidize. An amperometric measurement of TDS is based on Ohm’s Law, I = V/R where R depends on the distance between two pins and their surface. Oxidation changes both the distance and surface which will affect accuracy. The DiST’s non-oxidizing graphite pins are able to provide an optimal surface for accurate, dependable results.

When calibration is necessary, simply submerge the electrode tip into calibration solution and adjust the trimmer on the side of the tester.



Order Information:
HI 98301 (DiST 1) is supplied with protective cap, screwdriver, batteries and instructions.

  • Specifications
Range   1999 ppm (mg/L)
Resolution   1 ppm (mg/L)
Accuracy   ±2% F.S.
TDS Factor   0.5
Calibration Solution   HI 70032
Calibration   manual, 1 point
Probe   HI 73301
Temperature Compensation   automatic, 0 to 50°C (32 to 122°F)
Battery Type / Life   1.5V (4) / approx. 200 hours of continuous use
Environment   0 to 50°C (32 to 122°F); RH max 95%
Dimensions   175 x 41 x 23 mm (6.9 x 1.6 x 0.9")
Weight   95 g (3.4 oz.)

Write a review

Your Name:

Your Review: Note: HTML is not translated!

Rating: Bad           Good

Enter the code in the box below: