Funnel Seperating pear shape rotaflow stopcock With PTFE key & stopper (1000ml) MERCK

Funnel Seperating pear shape rotaflow stopcock With PTFE key & stopper (1000ml) MERCK
Brand: Merck (Glass wares)
Product Code: 1.74398.1000
Availability: In Stock
Price: Rs. 1,205
This product has a maximum quantity of 5

separatory funnel, also known as separation funnelseparating funnel, or colloquially sep funnel, is a piece oflaboratory glassware used in liquid-liquid extractions to separate (partition) the components of a mixture into twoimmiscible solvent phases of different densities[1] Typically, one of the phases will be aqueous, and the other a non-polar lipophilic organic solvent such as etherMTBEdichloromethanechloroform, or ethyl acetate. All of these solvents form a clear delineation between the two liquids.[2] The two layers formed are usually known as the organic and aqueous phases.[3] Most organic solvents float on top of an aqueous phase, though important exceptions are most halogenated solvents.[4] The organic solvent used for the extraction must not react with the substance to be extracted or with water. It should also have a low boiling point so it can be easily removed from the product.[5]

A separating funnel takes the shape of a cone with a hemispherical end. It has a stopper at the top and stopcock(tap), at the bottom. Separating funnels used in laboratories are typically made from borosilicate glass and their stopcocks are made from glass or PTFE. Typical sizes are between 50 mL and 3 L. In industrial chemistry they can be much bigger and for much larger volumes centrifuges are used. The sloping sides are designed to facilitate the identification of the layers. The stopcock-controlled outlet is designed to drain the liquid out of the funnel. On top of the funnel there is a standard taper joint which fits with a ground glass or Teflon stopper.[6]

To use a separatory funnel, the two phases and the mixture to be separated in solution are added through the top with the stopcock at the bottom closed. The funnel is then closed and shaken gently by inverting the funnel multiple times; if the two solutions are mixed together too vigorously emulsions will form. The funnel is then inverted and the tap carefully opened to release excess vapor pressure. The separating funnel is set aside to allow for the complete separation of the phases. The top and the bottom tap are then opened and the two phases are released bygravitation.

Before using the separatory funnel, make sure it is placed safely in a ring stand. Also place an Erlenmeyer flaskbelow the separatory funnel to ensure that any drops which may leak out of the funnel are caught in the flask. Finally, it is of vital importance to make sure that the stopcock is tightly closed.[7]


Write a review

Your Name:

Your Review: Note: HTML is not translated!

Rating: Bad           Good

Enter the code in the box below: